LVD低电压指令下面，针对逃生路线上使用的电控出口系统有专门的CE认证标准要求。
CE认证标准
EN13637:2015 Building hardware — Electrically controlled exit systemsfor use on escape routes — Re and testmethods建筑五金-逃生路线上使用的电控出口系统。要求和试验方法
ThisEuropean Standard specifies re for performance andtesting of electrically controlled exit systems, specificallydesigned for use in an emergency or panic situation on escaperoutes.本欧洲标准规定了专门设计用于紧急或恐慌情况下逃生路线的电控出口系统的性能和测试要求。
ThisEuropean Standard covers electrically controlled exit systems thatare either manufactured and placed on the market in their entiretyby one manufacturer or assembled from sub-assemblies produced bymore than one manufacturer and subse placed on the market asa kit in a single transaction.该欧洲标准涵盖了电控出口系统，这些系统要么是由一个制造商制造并全部投放市场，要么是由多个制造商生产的组件组装而成，然后在一次交易中作为套件投放市场。
Theseelectrically controlled exit systems consist of at least thefollowing elements, separated or combined:这些电控出口系统至少由以下独立或组合的元件组成:
— initiating element for re the release of electrical lockingelement in order to exit; 用于请求释放电锁元件以退出的启动元件;
— electrical locking element for securing an exit door;用于固定出口门的电气锁紧元件;
— electrical controlling element for supplying, connecting andcontrolling electrical locking
elementand initiating element;电气控制元件，用于供电、连接和控制电气锁定元件和起动元件;
— in addition, these electrically controlled exit systems can includetime delay and/or denied exit mode.此外，这些电控退出系统可以包括时间延迟和/或拒绝退出模式。
TheProducts covered by this standard are intended to be used for doorson escape routes, on either fire or non-fire rated door assemblies.本标准所涵盖的产品用于逃生通道的门，防火或非防火级别的门组件。
Examples of Products covered by this EuropeanStandard: 本欧洲标准涵盖的产品示例:
— electrically controlled exit systems designed to be used inemergency situations, where people are familiar with the exit andits hardware; 电控出口系统设计用于紧急情况，人们熟悉出口及其硬件;
— electrically controlled exit systems designed to be used in panicsituations, where people are not always familiar with the exit andits hardware;电控出口系统设计用于恐慌情况，在这种情况下，人们并不总是熟悉出口及其硬件;
— electrically controlled exit systems for use on hinged or pivoteddoor leaves only; 仅适用于铰链或枢轴门的电动出口系统;
— a range of electrically controlled exit systems including those foruse on double doorsets; 一系列电控出口系统，包括用于双开门装置的系统;
— the exceptional case of electrically controlled exit systemsintended for use on single leaf inwardly opening exit doors. It isassumed throughout this European Standard that exit doors generallyopen towards the outside in order to ensure safe escape. However,there are cases such as hospital or hotel bedroom doors, classroomdoors, etc. where building authorities allow, by way of exception,the exit door to open against the direction of exit;用于单叶片内开出口的电控出口系统的例外情况。在整个欧洲标准中，假定出口门通常向外打开，以确保安全逃生。但是，在有些情况下，如医院或酒店的卧室门、教室门等，建筑当局例外地允许出口门朝出口方向打开;
CMC CONTROL PANEL
CE认证测试项目Testing
5.2Tests for Ability to Release
5.2.1Test for number of operations to release
5.2.2Test for operation of initiating element
5.2.3Release function test - Input signal from the Alarm system such asan alarm
system(sample A)
5.2.4Tests for resetting conditions
5.2.5Test for operating element
5.2.6Test of fail safe function and failure of liaison and transmissionpaths, and release force test of initiating element (SampleA)
5.2.7Release force test - Door not under pressure (SampleA)
5.2.8Release force test - Door under pressure (SampleA)
5.2.9Release from the Initiating element
5.2.10Release tests after power supply failure (SampleA)
5.2.11Verification of dimensions and design
5.2.12Verification of Door mass and door dimensions
5.2.13Verification of keepers
5.2.14Verification of Initiating element with cover
5.2.15Test for finger trapping
5.2.16Verification of pictograms
5.2.17Release test according to time delay (Sample A)
5.2.18Central Management Control Tests
5.2.19Outside Access Device
5.2.20Security tests (Sample A)
5.3Tests for self-closing ability C (Sample A)
5.4Tests for Suitability for use on fire and smoke doors (Samples Dand E) .
5.5Control of Dangerous substances
5.6Tests for the Durability of ability to release and ability toself-closing (Sample A)
5.6.1General .
5.6.2Abuse resistance test of electrical lockingelement
5.6.3Abuse resistance test of initiating element
5.6.4Abuse resistance of electrically lockable operatingelement
5.6.5Temperature test (Sample B)
5.6.6Corrosion test (Sample B)
5.6.7Dry heat test (Sample B).
5.6.8Cold test (Sample B) .
5.6.9Damp heat cyclic test (12h + 12h) (Sample B)
5.6.10Impact test (Sample B)
5.6.11Supply voltage variations test (Sample B)
5.6.12Electrical hazards safety tests (Sample B)
5.6.13Electromagnetic compatibility (EMC) tests (SampleB)
5.6.14(IP)Protection against solid foreign objects and ingress of waterand dust test
(SampleB)