| Testitem 测试名称： |
| AmericanNational Standard for Mortise Locks & Latches Series1000 美国国家标准门锁和插销系列1000 |
| Testinfo 测试内容： |
| TestingItems |
| OPERATIONAL TEST(Sample A/B/C) 45 working days |
| 9.1 Dead bolttorque |
| 9.2 Force or torque retractlatch bolt or latch bolt and dead bolt |
| 9.3 Force to latchdoor |
| 9.4 Torque toretract latch bolt bykey |
| 9.5 Minimum projectionof latch bolt when depressed todead latched position |
| 9.6 Minimum projection ofauxiliary dead latch to deadlock latch bolt |
| 9.7 Warped doortest |
| STRENGTH TEST (Sample D/E/F)17working days |
| 9.8 Bolt strengthtest |
| 9.9 Axial load test |
| 9.10 Vertical loadtest |
| 9.11 Locked outside levertorque test |
| 9.12Unlocked lever torque test |
| 9.13 Unlocked entry handle setload test |
| 10.1 Knob, lever or paddleimpact test |
| 10.2 Cylinder guard orescutcheon impact test |
| 10.3 Cylinder guard orescutcheon tension test |
| 10.4 Cylinder body or housingtension test |
| 10.5 Locked knob, lever orpaddle test |
| 10.6 Cylinder body or housingtorque test |
| 10.7 Cylinder guard orescutcheon torque test |
| 10.8 Cylinder face impacttest |
| 10.9 Dead bolt or latch bolt ordead bolt and latch bolt impact test |
| 10.10 Bolt pressuretest |
| 10.11 Dead bolt sawingtest |
| 11 CYCLE TEST(SampleA/B/C) |
| Grade 1: 1,000,000cycles 130 days |
| Grade 2: 800,000cycles 120days |
| Grade 3: 800,000cycles 120days |
| 12 FINISHTEST - 12workingdays |
| 12.2 Salt spray test (Sample G) |
| 12.3 Humidity test (Sample H) |
| 12.4 Finish hardnesstest |
| 12.5 Taber test |
| 12.6 Prespirationtest |
| 12.7 Ultra violet light and condensation test |
| 13.1 Knob crushtest |
| 13.2 Rose and escutcheon denttest |
| 13.3 Outside rose deformationtest |
| SampleRe: 20 pieces ofsamples |
| 样品要求:20件样品 |
| Others 其他信息：美国标准要求将锁装在试验机的试验门上，试验门门高762mm～914mm，使试验门有足够空间装下受试样品。试验装置能够提供以下试验步骤：a)转动执手缩回锁舌；b)开启试验门；c)松开执手；d)关闭试验门使锁完全锁闭。试验频率不大于30次/min。 美国标准寿命试验测试方法，模拟实际使用环境下对锁操作的全过程，当门关闭时，存在锁舌冲击锁扣板的过程。因此，美国标准寿命试验测试方法更能够体现出门锁在实际使用中的性能。根据ANSI/BHMA A 156.2的要求，试验机结构设计满足如下要求：1钢质试验门框架；2门锁通过胶合板固定在试验门框架上；3试验门门宽762mm～914mm，门厚45mm；4门边和所扣板间隙能够调整至3mm；5合页规格115mm6试验频率通过调节气缸能够实现在30次/min内可调。 |
Sample forreference 参考图片:
Sample Report报告样本：