GB/T15107 <旅游鞋AthleticShoes> /GB 28011 鞋类钢勾心 | |||||
测试具体项目Testing itemlist | |||||
适用范围:一般穿用的运动鞋、练习鞋、健身鞋、散步鞋、慢跑鞋等,不包括竞技运动鞋。 Scope:Thegeneral sports shoes, trainer shoes, gym shoes, walking shoes,jogging shoes used in daily life. | |||||
序号 No. | 测试项目 testitem | 标准要求re | 测试方法 testmethod | ||
优等品 High-classgrade | 合格品 Qualifiedgrade | ||||
1● | 物理机械性能 mechanicalproperties | 感官质量 Appearance | 符合GB/G15107表1 comply withre of table 1 | GB/T 3903.5 | |
2● | 剥离强度 PeelingStrength | 帮底剥离强度≥60N/cm; 底墙与帮面剥离强度≥90N/cm | 帮底剥离强度≥45N/cm; 底墙与帮面剥离强度≥70N/cm | GB/T 3903.3 | |
在剥离试验中若材料撕裂而剥离层未开时,剥离强度≥20N/cm | |||||
3● | 外底与外中底粘合强度 Adhesion BetweenOutsole and Midsole | ≥20N/cm;发泡材料撕裂而粘合层不开时≥15N/cm ≥20N/cm;when foam material havebeen teared but still bonding≥15N/cm | QB/T 2886 | ||
4● | 成鞋耐折 FlexingResistance | 折后不得出现帮面裂面;底墙、帮底、鞋底开胶≤5.0mm;折后外底不得出现裂纹;外底不得出现涂色脱落;有气(液)垫的鞋折后气(液)垫不应出现漏气(液)、瘪塌现象 | 折后不得出现帮面裂面;底墙、帮底、鞋底开胶≤5.0mm;折后鞋底出现裂纹不得超过3处,且*长裂纹长度≤5.0mm;鞋底不得出现涂色脱落;有气(液)垫的鞋折后气(液)垫不应出现漏气(液)、瘪塌现象 | GB/T 3903.1 | |
5● | 外底耐磨 AbrasionResistance | ≤10.0mm | ≤12.0mm | GB/T 3903.2 | |
6 | 帮面材料低温屈挠 Flexing Resistanceof Upper Material at Low Temperature | 符合QB/T2224 comply withre of QB/T 2224 | QB/T 2224 | ||
7● | 衬里和內垫摩擦色牢度 Colour Fastness toRubbing of Lining and Insock | ≥2/3级(grade) | QB/T 2882 | ||
8● | 安全性能 safetyproperties | 可分解有害芳香胺染料 AZO Dye | 纺织品textile≤20mg/kg,皮革leather≤30mg/kg | Textile:GB/T 17952 Leather:GB/T19942 | |
9● | 游离甲醛 FreeFormaldehyde Content | B类≤75mg/kg;C类≤300mg/kg category B≤75mg/kg; categoryC ≤300mg/kg | 皮革leather GB/T19941 | ||
纺织品textile GB/T2912.1 | |||||
服务种类Service type: 常规7个工作日,加急4个工作日/regular service 7 working days, Express 4 workding days | |||||
送测样品量Samplesize: 至少2双成鞋/ at least2 pair of finished footwear |
Sample forreference 参考图片:
Sample report 样本报告: