Testitem 测试名称: PanelSystems 屏风系统
Test info 检测要求:
4 | Panel flammability test 防火测试 |
5 | Stability test for panel systemsproducts 稳定性测试 |
6 | Mechanical strength test for panelsystems products 机械强度测试 |
7 | Panel glide assembly strength test 面板滑轨强度测试 |
8 | Panel component static load tests 板状构件强度测试 |
8.1 | Work surface concentrated functional loadtest 工作台面集**能载荷测试 |
8.2 | Horizontal surface distributedfunctional load test 水平台面均布功能载荷测试 |
8.3 | Horizontal surface concentrated proofload tests 水平台面集中破坏载荷测试 |
8.4 | Horizontal surface distributed proofload test 水平台面均布破坏载荷测试 |
8.5 | Transaction surface torsional loadtest 记录台面扭曲载荷测试 |
8.6 | Functional load test for panel mountedstorage units – static 储存柜功能载荷测试 |
8.7 | Proofload test for panel mounted storage units –static 储存柜破坏载荷测试 |
9 | Locktests – static 锁测试 |
9.1 | Testfor extendible element locks 抽屉锁测试 |
9.2 | Forcetest for door locks 门锁测试 |
10 | Panel mounted component cyclic durabilitytests 屏风构件疲劳测试 |
10.1 | Work surface durability (top load ease)test 工作台面疲劳测试 |
10.2 | Wearand fatigue test for hinged doors 带铰链的门疲劳测试 |
10.3 | Droptest for horizontally hinged doors –cyclic 带铰链的门跌落测试 |
10.4 | Wearand fatigue test for horizontal recedingdoor 水平伸缩门疲劳测试 |
10.5 | Wearand fatigue test for vertical recedingdoor 垂直伸缩门疲劳测试 |
10.6 | Sliding and roll-front door wear andfatigue test 滑动门和卷门疲劳测试 |
10.7 | Slamtest for sliding and roll-front doors which free-fall open or closed 大力打开/关闭测试(滑动门和卷门,靠重力打开/关闭) |
10.8 | Slam open/closed test for sliding and roll-front doors that do not free-fall 大力打开/关闭测试(滑动门和卷门,不靠重力打开/关闭) |
10.9 | Slam open/closed test for vertically hingeddoors 大力打开/关闭门测试(铰链垂直安装) |
10.1 | Doorlatch test 门插销测试 |
10.11 | Cycletest for extendible elements deeper thanwide 抽屉疲劳测试 (宽度小于深度) |
10.12 | Cycletest for extendible elements wide thandeeper 抽屉疲劳测试 (宽度大于深度) |
10.13 | Cycletest for center/pencil drawers 铅笔盒疲劳测试 |
10.14 | Outstop test 抽屉外挡块测试 |
10.15 | Rebound test 抽屉反弹测试 |
10.16 | Locking mechanism cycles test for alllocks 锁机构疲劳测试 |
10.17 | Adjustment tests for adjustable keyboardsurfaces and input device supports可调节键盘疲劳测试 |
10.18 | Work surface vertical adjustment test 工作台面垂直调节测试 |
10.19 | Vertically or horizontally hingedsliding door out stop tests 滑动门外挡块测试 |
11 | Dislodgment test for panel-mountedcomponents 抗搬运能力测试 |
12 | Pullforce test 抽屉拉力测试 |
Sample size 送样规格:
2 sets ofcompleted products with assembly instruction (if applicable) isrecommended.
全套样品2套并包括安装说明书(如适用).
Lead time测试周期: 常规 Regular service 14 workingdays
Others其他信息:
Sample for reference参考图片:
Sample Report报告样本: