| Test item测试名称： Performance Standard for Solid SurfaceMaterials 硬质表面材料性能要求 | |
| Testinfo 测试内容： | |
| Clause | TestRe |
| package price (kitchen) 整体价格（用于厨房）： | |
| 3 | General re普通要求 |
| 3.1 | Composition 构成 |
| 3.2 | Materials 材料 |
| 3.3 | Dimensions andtolerances 尺寸以及偏差 |
| 3.5 | Installation,care, andmaintenance instructions 安装，注意以及保养说明 |
| 3.7 | Identification鉴别 |
| 4 | Workmanship and finish工艺以及外观检查 |
| 5 | Structural integrity 结构完整性 |
| 5.2 | Load test 负荷试验 |
| 5.3 | Impact tests冲击试验 |
| 5.3.1 | Point impact点冲击试验 |
| 5.3.2 | Knife drop test小刀跌落试验 |
| 5.3.3 | Skillet drop test煮锅跌落试验 |
| 6 | Physical characteristics ofmaterial 材料的物理性状 |
| 6.1 | Colorfastness and agingtest 不退色以及抗老化试验 |
| 6.2 | Stain resistance test抗污染试验 |
| 6.3 | Cigarette test香烟试验 |
| 6.4 | Chemical resistance test抗化学试验 |
| 6.5 | Heated pan test加热平底盘试验 |
| 6.6 | High Temperature Resistance Test 耐高温试验 |
| 6.7 | Water resistanceTest冷热循环试验 |
| 7 | Ability to be Fabricated andRenewed 可再造和打磨性 |
Samplingre: 3 sets of completed sampleswith assembly instruction (if applicable) Another samplesshould be supplied. Asfollow: | |
| 3 pcs of approximately 95mm*95mm & 2 pcs of approximately150mm*150mm | |
| the flat specimen material madefrom the same materials as the units; 3 pcs of samples with size 4”X 15” | |
样品要求：全套样品3套并包含安装说明书（如适用），需要另外提供下面的样品： 3片尺寸约为95mm*95mm &2片尺寸约为150mm*150mm的平面样品，样品的材料要与产品材料相同。 3片4"X15"的样品 | |
| Turnaroundtime: normal (23 workingdays) | |
| 所需时间：标准（23个工作日） | |
Sample forreference 参考图片:
>Sample Report报告样本：