EN16434, 内窗帘,防止勒颈窒息危险 安全器件要求和测试方法 | |
条款Clause | 测试项目Testitem |
Tensioning device张紧构件 | |
5 | Artificial ageing人工老化: Exposure toUV 紫外线老化 Mechanicalendurance 机械寿命 Exposure to high/lowtemperature 高低温 |
6 | Functional peroformance功能性测试 Note: Perform after originalcondition, UV, endurance, high/low temperature 原始条件和老化后各试验一次 |
11.2 | Release of smallcomponents 小部件测试 |
11.3 | Impact resistance冲击测试 Note: Perform after UV,high/low temperature UV 和高低温后各试验一次 |
Breakaway device分离构件 | |
5 | Artificialageing: Exposure to UV 紫外线老化 Mechanicalendurance 机械寿命, Exposure to high/lowtemperature 高低温 |
7 | Functionalperoformance功能性测试 Note: Perform after originalcondition, UV, endurance, high/low temperature 原始条件和老化后各试验一次 |
11.2 | Release of smallcomponents 小部件测试 |
Accumulationdevice积线构件 | |
5 | Artificialageing人工老化: Exposure toUV紫外线老化 Mechanicalendurance机械寿命(for withmoving parts带移动部分) Exposure tohigh/low temperature高低温 |
8 | Functional peroformance功能性测试 Note: Perform after originalcondition, UV, endurance, high/low temperature 原始条件和机械寿命后各试验一次 |
11.2 | Release of smallcomponents 小部件测试 |
11.3 | Impactresistance冲击测试 Note: Perform after UV,high/low temperature UV和高低温后各试验一次 |
Non tangling device防缠结构件 | |
9 | Functionalperoformance功能性测试 |
11.2 | Release of smallcomponents |
Inner cord stop内线止动构件 | |
5 | Artificialageing人工老化: Exposure toUV紫外线老化 |
10 | Functional performance功能性测试 |
11.2 | Release of smallcomponents 小部件测试 |
测试时间 Testtime | 含老化和机械寿命(incl. UV &Mechanical endurance):35 工作日Workingdays 不含老化和机械寿命(not incl. UV &Mechanical endurance):12 工作日Working days |
样品要求 Samplerequired | 三套有代表性的窗帘样品和10m长度拉绳 Three representative blindproduct and 10 m pull cord,including: 张紧构件Tensioningdevice:10个 (pieces) 分离构件Breakawaydevice:10个 (pieces) 积线构件Accumulationdevice:5个 (pieces) 防缠结构件Non tanglingdevice: 3 对 (pairs) 内线止动构件Inner cord stop:3个 (pieces) |
Sample forreference 参考图片:
>Sample Report报告样本: