Testitem 测试名称: | ||||||||||||
Testsfor electric cables under fire conditions – Circuit integrity –Part 2: Test method for fire with shock at a temperatureof at least 830 °C for cables of rated voltage up toand including 0,6/1,0 kV and with an overall diameter not exceeding20 mm | ||||||||||||
着火条件下电缆的试验.电路完整性.第2部分:额定电压高达和包括0.6/1.0KV,全径不超过20 mm的电缆在温度不低于830°C的冲击火焰下的试验方法 | ||||||||||||
Testinfo 测试内容: | ||||||||||||
TestClause | Requirement | |||||||||||
Conditioning | None | |||||||||||
Flame applicationtime | ||||||||||||
30 min | ||||||||||||
60 min | ||||||||||||
90 min | ||||||||||||
120 min | ||||||||||||
SampleRequired: | 7 m | |||||||||||
Turnaroundtime: normal (9 workingdays) | ||||||||||||
所需时间:标准(9个工作天) |
Sample for reference参考图片:
>Sample Report报告样本: