Agilent/HP 86116C 40 to 65 GHz Optical and 80 GHz 电子插件模块规格书
Cutting edge component and subsystem designs require accuratecharacterization of very high-speed signals. When viewing waveformsin the 10 to 100 Gb/s range, three re are critical in anoscilloscope: a well designed frequency response, a wide bandwidth,and extremely low internal jitter. The 86116C optical andelectrical modules represent some of the fastest solutionsavailable for measuring high-speed communication signals.Characteristically with 45 or 70 GHz optical and 93 GHz electricalbandwidth, the 86116C when paired with the 86107A precisiontimebase module becomes the ideal solution for ultra high-speedwaveform analysis. Designers will see the real performance of theirdevices and not aberrations created by the test equipment.
The unfiltered bandwidth settings provide the best pulse fidelitymode for measurement and display of very high-speed waveforms andprovides a fast full-width, half-max (FWHM) of less than 7.4 ps(86116C-041). User selectable bandwidth settings can reduce noisewhen observing small signals. The electrical channel features over93 GHz bandwidth. This yields a 3.9 ps system risetime. Just asimportant as bandwidth, the channel has a well controlled fre to minimize waveform distortion. User selectable bandwidthsettings can be used for reduced instrumentation noise.
Key Features &Specifications
86116C-041 Optimized for high-speed telecom signals
40G SONET/SDH and faster signals
70 GHz characteristic optical bandwidth displays up to 107 Gb/sNRZ
Reference receiver for 39.81, 41.25 and 43.02 Gb/s NRZ
86116C-025 Optimized for high-speed LAN/SAN signals
25G Ethernet (x4 for 100 GbE) and 16G Fibre Channel (single-modevariants)
45 GHz characteristic optical bandwidth displays up to 40 Gb/sNRZ
Reference receiver for 17, 25.8, and 27.7 Gb/s NRZ
Included in both options
93 GHz characteristic electrical bandwidth
55, 30 GHz settings for best sensitivity (0.6, 0.5 mVRMS characteristic)
Electrical Input: 1.85 mm male
