产品范围：雨靴，雨鞋
产品标准：HGT 2019-2011黑色雨靴(鞋)，HGT 2020-2011 彩色雨靴(鞋)
检测项目，产品要求
HGT 2019-2011 黑色雨靴(鞋)
1 Appearance : Black RainRubber Boots (Shoes)
外观质量 : 黑色雨靴 (鞋) HG/T 2019 4.6No major defects
2 Tensile Strength forOutsole
外底拉伸强度 GB/T 528 Upper: Min10.0 Mpa
Outsole: Min 7.0Mpa
3 Breaking Elongation
拉断伸长率 GB/T 528 Upper: Min400%
Outsole: Min 320%
4 Abrasion Test forOutsole
外底磨耗量 GB/T 1689 Outsole: Max1.2cm³
5 Hardness for outsole (shorehardness)
外底硬度 GB/T 531.1 Upper: Max 65ShoreA
Outersole: Max 70 ShoreA
6 Sole bond (outsole andmidsole) strength
外底与外中底粘合强度 GB/T 532 Upper:Min 0.4 N/mm
7 Elongation of Film: BlackRain Rubber Boots (Shoes)
漆膜伸長率: 黑色雨靴 (鞋) HG/T 2019Annex A Upper: Min
8 Tensile Retention AfterAgeing test
老化和耐热试验 GB/T 3512 Min80%
9 Thickness of Outsole :Black Rain Rubber Boots (Shoes)
鞋或厚度 : 黑色雨靴 (鞋) HG/T2019.5.9.1 Shoes size: > 230
Forepart: Min 4.0 mmfor rolling; Min 6.0 mm for mould
Base: Min 2.0 mm for rolling;Min 2.5 mm for mould
Heelpart: Min 5.0 mm forrolling; Min 7.0 mm for mould
Shoes size <=230
Forepart: Min 3.0 mm forrolling; Min 5.0 mm for mould
Base: Min 1.6 mm forrolling; Min 2.0 mm for mould
Heelpart: Min 4.0 mmfor rolling; Min 6.0 mm for mould
10 Thickness of Upper : BlackRain Rubber Boots (Shoes)
鞋帮厚度 : 黑色雨靴 (鞋) HG/T 20195.9.2 Min 1.0 mm
11 Water Resistance
耐渗水试验 HG/T 3664 Noleak
12 Size marking
鞋号 GB/T 3293.1 The marking ofsize shall be included the length and width of foot, and the heightof letter for marking shall be not less than 3 mm.
13 Labeling and packaging
标示及包装 HG/T 2403Satisfactory
HGT 2020-2011 彩色雨靴(鞋)
No. Test Items Test Method GBTest Requirement
(Pass Grade)
1 Appearance : Color RainRubber Boots (Shoes)
外观质量 : 彩色雨靴 (鞋) HG/T 2020 4.6No major defects
外底拉伸强度 GB/T 528 Upper: Min10.0 MPa Outsole: Min 7.0 Mpa
拉断伸长率 GB/T 528 Upper: Min400% Outsole: Min 320%
外底磨耗量 GB/T 1689 Outsole: Max2.1 cm³
