好东方替代cooper电感FP1007R1-R14-R

Product specifications Part Number7OCL1(nH)±10% FLL2(nH) minimum I rms 3 (amps) I sat14(amps) I sat25(amps) DCR (mΩ)@ 20°C ±5% K-factor8R1 version FP1007R1-R12-R 120 86 60 81 65 0.29 ± 10% 371 FP1007R1-R14-R 140 100 60 72 56 0.29 ± 10% 371 FP1007R1-R17-R 170 122 60 58 46 0.29 ± 10% 371 FP1007R1-R22-R 215 155 60 50 36 0.29 ± 10% 371 FP1007R1-R30-R 300 216 60 32 26 0.29 ± 10% 371 R2 version FP1007R2-R12-R 120 86 51 81 65 0.48 ± 8% 368 FP1007R2-R14-R 140 100 51 72 56 0.48 ± 8% 368 FP1007R2-R17-R 170 122 51 58 46 0.48 ± 8% 368 FP1007R2-R22-R 215 155 51 50 36 0.48 ± 8% 368 FP1007R2-R30-R 300 216 51 32 26 0.48 ± 8% 368 R3 version FP1007R3-R12-R 115 83 61 94 86 0.29 ± 5% 354 FP1007R3-R15-R 150 108 61 76 70 0.29 ± 5% 354 FP1007R3-R17-R 175 126 61 66 60 0.29 ± 5% 354 FP1007R3-R22-R 215 155 61 50 43 0.29 ± 5% 354 FP1007R3-R23-R 230 165 61 48 40 0.29 ± 5% 354 FP1007R3-R27-R 270 194 61 40 34 0.29 ± 5% 354 FP1007R3-R30-R 300 216 61 35 30 0.29 ± 5% 354 1. Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.1Vrms,0.0Adc, +25°C 2. Full Load Inductance (FLL) Test Parameters: 100kHz, 0.1Vrms,Isat1,+25°C 3. I rms:Irms: DC current for an approximate temperature rise of 40ºCwithout core loss. Derating is  necessaryfor AC currents. PCB layout, trace thickness and width, air-flow,and proximity of other  heatgenerating components will affect the temperature rise. It isrecommended that the  temperatureof the part not exceed 125°C under worst case operating conditionsverified in the  endapplication. 4. I sat1:Peak current for approximately 20% rolloff @ +25°C5. I sat2:Peak current for approximately 20% rolloff @ +125°C6. K-factor: Used to determine Bp-pfor core loss (see graph).  Bp-p= K * L * ∆I* 10-3.Bp-p:(Gauss),K: (K-factor from table),  L:(Inductance in nH), ∆I(Peak-to-peak ripple current in Amps).  7.Part Number Definition: FP1007Rx-Rxx-R FP1007R= Product code and size x = DCR indicator Rxx = Inductance value in μH, R= decimal point -R suffix = RoHS compliant Dimensions (mm)