IC-4认证哪里可以做，IC-4怎么测试

　IC-4认证哪里可以做，IC-4怎么测试

测试箱充满隔热棉测试要求：1, 灯具上的零部件不超过限值;2, 安装表面以及测试盒子的任何部位不超过90℃;3,灯具外表面不超过90℃

　　HCB=20mm; MIC=0mm; SCB=20mm; SCI=0mm

　　IC-4测试标准为：AS/NZS 60598.2.2：:2016。

　　可以安装在可燃物表面，可以被隔热材料靠近及覆盖， 并且产品需要满足IP4X防尘 要求。

　　测试条件：1, 测试环境: 25℃±5℃

　　2, 测试电压: 0.94 or 1.06 倍额定电压3, 测试时间: 直到稳定或者8h以上4, 测试箱尺寸(长x宽x高):450mmx450mmx300mm5, 隔板尺寸(长x宽x厚): 450mmx150mmx40mm

IC、IC-4和CA90、CA150申请流程：

　　1.填写申请表

　　2.寄样品过来

　　3.测试

　　4.出测试报告

　　CA80: Type CA 80,closed abutted,recessed luminaire wherefixed,building insulating material that can safely be exposedcontinuously to temperatures up to 90°C must not cover but maychosely abut the sides of the luminaire. The symbol shall bepermanently marked on the back of the fitting,be clearly visible,atleast 20mm high and clearly legible.

　　IC:Type IC recessed luminaire where building insulation that cansafely be esposed continuously to temperatures up to 90°C may bautand cover the luminaire. The symbol shall be permanently marked onthe back of the fitting,be clearly visible,at least 20mm high andclesrly legible.

　　IC-4:Type IC-F recessed luminaire where building insulation thatcan safely be

　　exposed continuously to 90°C may abut or cover the luminaire. Thesymbol

　　shall be permanently marked on the back of the fitting, beclearly visible, at

　　least 20 mm high and clearly legible. Resistant to ingress ofexternal matter.

凯睿检测专注项目：

产品：CE认证、ROHS认证、FCC认证、TELEC认证、UKCA认证、REACH认证
电池：UN 38.3认证、IEC 62133报告、MSDS认证、CB认证、UL1642报告、UL2849报告、UL2054报告、UL2271报告
亚马逊：CPC认证、CPSC认证、CCPSA认证、亚马逊GCC认证、美国TSCA检测、加州65认证
中东国家：IECEE认证、CB认证、COC认证、沙特SABER认证、尼日利亚SONCAP认证、埃及COI证书

凯睿检测（深圳）有限公司

深圳市宝安区沙井街道大埔二路4号