SMO105A-DDM AGC光接收模块
特征
● 光输入控制在 - 8dBm 至 +2dBm 范围内
● 单+5V 电源
● 极低的噪音
● 带宽1000MH
● 高精度温度监控
● 可以控制射频信号的关闭和打开
● FC/APC SC/APC
描述
SMO105A-DDM AGC 光接收器模块具有 FC/APC 或 SC/APC 连接器。 放大器电源电压引脚连接到5V(DC)。模块有一个单模光输入，适用于 1300 到 1600nm 波长，一个用于监测光电二极管电流的端子和一个特性阻抗为 75Ω的电气输出。
Download product specification:SMO105A-DDM.PDF
FEATURES
● The Optical Inputcontrolled in the range of - 8dBm to +2dBm
● Single +5VSupply
● Extremely lownois
● Bandwidth1000MH
● Monitor thetemperature of high precisio
● Can control the RFsignal closing and opening
● FC/APCSC/APC
DESCRIPTION
The SMO105A-DDM AGCOptical Receiver Module has an FC/APC or SC/APCConnector. The amplifier supply voltage pin Connectto 5V(DC) .The moduleshave a monomode optical input Suitable for 1300 to 1600nmwavelengths a terminal to monitor the photodiode current and an electrical Output having a characteristicimpedance of 75Ω.
| CHARACTERISTICS | ||||||
| (Bandwidth 40 to 1000MHZ; Tmb＝25℃, VB＝5V, ZS＝ZL＝75Ω) | ||||||
| SYMBOL | PARAMETER | UNIT | MIN. | TYP. | MAX. | CONDITIONS |
| s | responsively | V/W | 850 | - | - | λ=1300nm-1600nm |
| FL | Flatness offrequency response | dB | - | ±0.75 | - | f=40 to 1000MHZ |
| Vo | Output Voltage | dBuV | 79 | 80 | 81 | Popt= -8 ~+2dBm,f=550MHz, |
| CTB | Composite TripleBeat | dB | - | - | -62 | Test atOptical input Power–1dBm.84 PAL-D channelsDS22,OMI=3.5%perchannel |
| CSO | Composite SecondOrder distortion | dB | - | - | -61 | |
| CNR | Noise carraierrating | dB | - | 50 | - | |
| S22 | Output ReturnLoss | dB | -12 | - | - | f=40 to 1000MHZ |
| Itot | Total CurrentConsumption | mA | 230 | 250 | 280 | VB=5V |
| The module normally operates at VB=5 V | ||||||
