Testitem 测试名称: | |
AmericanNational Standard for Plastic Lavatories 塑料洗脸盆的美国国家标准 | |
Testinfo 测试内容: | |
Clause | TestRe |
2 | Generalre 普通要求 |
2.1 | Material材料 |
2.2 | Dimensionaltolerances 尺寸偏差 |
2.6 | Identification鉴别 |
3 | Workmanship andfinish 工艺与外观 |
4 | Structuralintegrity of complete units (all types) 整体产品的结构整体检查 |
4.2 | Drain fittingconnection 排水连接件的试验 |
4.3 | Point impactloads 点冲击试验 |
4.4 | Loads on lavatorytops 脸盆表面的负载试验 |
5 | Physicalcharacteristics of materials (all types) 材料的物理性状 |
5.1 | Colorfastnesstest 退色试验 (specificcondition)(MR) |
5.2 | Stain resistancetest 耐污染性测试 |
5.3 | Wear andcleanability test 磨耗与清洁能力测试 |
5.4 | Cigarettetest 香烟测试 |
5.5 | Chemical resistancetest 抗化学测试 |
5.6 | Thermal shockresistance test 冷热冲击测试 |
6 | Additional materialtests 附加材料测试 |
6.1.1 | Hot waterresistance test method (type 1,2and3) 抗热水测试(用于型号1,型号2以及型号3) |
6.1.2 | Thermal shockresistance test method (type 3,4and 5) 抗热冲击测试(用于型号3,型号4以及型号5) |
Sampling re:3 sets of completedsamples with assembly instruction (ifapplicable) , Another samplesshould be supplied. As follow: | |
3 pcsof approximately 95mm*95mm & 2 pcs ofapproximately 150mm*150mm | |
theflat specimen material made from the same materials as the units; 3pcs of samples with size 4” X 15” | |
样品要求:全套样品3套并包含安装说明书(如适用),需要另外提供下面的样品:3片尺寸约为95mm*95mm &2片尺寸约为150mm*150mm的平面样品,样品的材料要与产品材料相同。3片4"X15"的样品 | |
Turnaround time:normal (23 workingdays); | |
所需时间:标准(23个工作日) |
Sample forreference 参考图片: