点击上方“电磁兼容检测”,马上关注
GB/T17626及IEC61000-4系列现行有效标准
摘要:介绍了GB/T17626系列现行有效标准,共27个标准,以及IEC61000-4系列现行有效标准,共36个标准。
IEC61000-4系列标准是国际电工委员会IEC所颁布的一个抗扰度试验方面的基础性标准,适用于各种电气与电子设备作电磁兼容性的测试,IEC61000-4系列标准实用性高、可操作性强,IEC61000-4系列标准对不同电磁环境条件下的电气与电子设备的电磁兼容性有不同的要求,应用非常之广泛。IEC61000-4系列标准对应国内标准是GB/T17626系列标准。
GB/T17626系列现行标准
GB/T 17626.1-2006电磁兼容 试验和测量技术 抗扰度试验总论
GB/T 17626.2-2018电磁兼容 试验和测量技术 静电放电抗扰度试验
GB/T 17626.3-2016电磁兼容 试验和测量技术 射频电磁场辐射抗扰度试验
GB/T 17626.4-2018电磁兼容 试验和测量技术 电快速瞬变脉冲群抗扰度试验
GB/T 17626.5-2008电磁兼容 试验和测量技术 浪涌(冲击)抗扰度试验
GB/T 17626.6-2017电磁兼容 试验和测量技术 射频场感应的传导骚扰抗扰度
GB/T 17626.7-2017电磁兼容 试验和测量技术 供电系统及所连设备谐波、间谐波的测量和测量仪器导则
GB/T 17626.8-2006电磁兼容 试验和测量技术 工频磁场抗扰度试验
GB/T 17626.9-2011电磁兼容 试验和测量技术 脉冲磁场抗扰度试验
GB/T 17626.10-2017电磁兼容 试验和测量技术 阻尼振荡磁场抗扰度试验
GB/T 17626.11-2008电磁兼容 试验和测量技术 电压暂降、短时中断和电压变化的抗扰度试验
GB/T 17626.12-2013电磁兼容 试验和测量技术 振铃波抗扰度试验
GB/T 17626.13-2006电磁兼容 试验和测量技术 交流电源端口谐波、谐间波及电网信号的低频抗扰度试验
GB/T 17626.14-2005电磁兼容 试验和测量技术 电压波动抗扰度试验
GB/T 17626.15-2011电磁兼容 试验和测量技术 闪烁仪 功能和设计规范
GB/T 17626.16-2007电磁兼容 试验和测量技术 0Hz~150kHz共模传导骚扰抗扰度试验
GB/T 17626.17-2005电磁兼容 试验和测量技术 直流电源输入端口纹波抗扰度试验
GB/T 17626.18-2016电磁兼容 试验和测量技术 阻尼振荡波抗扰度试验
GB/T 17626.20-2014电磁兼容 试验和测量技术 横电磁波(TEM)波导中的发射和抗扰度试验
GB/T 17626.21-2014电磁兼容 试验和测量技术 混波室试验方法
GB/T 17626.22-2017电磁兼容 试验和测量技术 全电波暗室中的辐射发射和抗扰度测量
GB/T 17626.24-2012电磁兼容 试验和测量技术 HEMP传导骚扰保护装置的试验方法
GB/T 17626.27-2006电磁兼容 试验和测量技术 三相电压不平衡抗扰度试验
GB/T 17626.28-2006电磁兼容 试验和测量技术 工频频率变化抗扰度试验
GB/T 17626.29-2006电磁兼容 试验和测量技术 直流电源输入端口电压暂降、短时中断和电压变化的抗扰度试验
GB/T 17626.30-2012电磁兼容 试验和测量技术 电能质量测量方法
GB/T 17626.34-2012电磁兼容 试验和测量技术主电源每相电流大于16A的设备的电压暂降、短时中断和电压变化抗扰度试验
IEC61000-4系列现行标准
IEC 61000-4-1:2016 - Electromagnetic compatibility (EMC) – Part4-1: Testing and measurement techniques – Overview of the IEC61000-4 series
IEC 61000-4-2:2008 - Electromagnetic compatibility (EMC) – Part4-2: Testing and measurement techniques – Electrostatic dischargeimmunity test
IEC 61000-4-3:2010 - Electromagnetic compatibility (EMC) – Part4-3: Testing and measurement techniques – Radiated,radio-frequency, electromagnetic field immunity test
IEC 61000-4-4:2012 - Electromagnetic compatibility (EMC) – Part4-4: Testing and measurement techniques – Electrical fasttransient/burst immunity test
IEC 61000-4-5:2017 - Electromagnetic compatibility (EMC) – Part4-5: Testing and measurement techniques – Surge immunity test
IEC 61000-4-6:2013 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART4-6: TESTING AND ***SUREMENT TECHNIQUES - IMMUNITY TO CONDUCTEDDISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
IEC 61000-4-7:2009 - Electromagnetic compatibility (EMC) – Part4-7: Testing and measurement techniques – General guide onharmonics and interharmonics measurements and instrumentation, forpower supply systems and equipment connected thereto
IEC 61000-4-8:2009 - Electromagnetic compatibility (EMC) – Part4-8: Testing and measurement techniques – Power frequency magneticfield immunity test
September 1, 2009 - IEC
IEC 61000-4-9:2016 - Electromagnetic compatibility (EMC) – Part4-9: Testing and measurement techniques – Impulse magnetic fieldimmunity test
IEC 61000-4-10 :2016- Electromagnetic compatibility (EMC) - Part4-10: Testing and measurement techniques - Damped oscillatorymagnetic field immunity test
IEC 61000-4-11:2017 - ELECTROMAGNETIC COMPATIBILITY (EMC) – Part4-11: Testing and measurement techniques – Voltage dips, shortinterruptions and voltage variations immunity tests
IEC 61000-4-12 :2017- Electromagnetic compatibility (EMC) – Part4-12: Testing and measurement techniques – Ring wave immunitytest
IEC 61000-4-13:2015 - Electromagnetic compatibility (EMC) – Part4-13: Testing and measurement techniques – Harmonics andinterharmonics including mains signalling at a.c. power port, lowfrequency immunity tests
IEC 61000-4-14:2009 - Electromagnetic compatibility (EMC) – Part4-14: Testing and measurement techniques – Voltage fluctuationimmunity test for equipment with input current not exceeding 16 Aper phase
IEC 61000-4-15:2010 REDLINE - Electromagnetic compatibility(EMC) – Part 4-15: Testing and measurement techniques –Flickermeter – Functional and design specifications
IEC 61000-4-16:2015 - Electromagnetic compatibility (EMC) – Part4-16: Testing and measurement techniques – Test for immunity toconducted, common mode disturbances in the frequency range 0 Hz to150 kHz
IEC 61000-4-17:2009 - Electromagnetic compatibility (EMC) – Part4-17: Testing and measurement techniques – Ripple on d.c. inputpower port immunity test
IEC 61000-4-18:2011 - Electromagnetic compatibility (EMC) – Part4-18: Testing and measurement techniques – Damped oscillatory waveimmunity test
IEC 61000-4-19:2014 -Electromagnetic compatibility (EMC) – Part 4-19: Testing andmeasurement techniques – Test for immunity to conducted,differential mode disturbances and signalling in the frequencyrange 2 kHz to 150 kHz at a.c. power ports
IEC 61000-4-20:2010 - Electromagnetic compatibility (EMC) – Part4-20: Testing and measurement techniques – Emission and immunitytesting in transverse electromagnetic (TEM) waveguides
IEC 61000-4-21:2011 - Electromagnetic compatibility (EMC) – Part4-21: Testing and measurement techniques – Reverberation chambertest methods
IEC 61000-4-22:2010 - Electromagnetic compatibility (EMC) – Part4-22: Testing and measurement techniques – Radiated emissions andimmunity measurements in fully anechoic rooms (FARs)
IEC 61000-4-23:2016 -Electromagnetic Compatibility (EMC) - Part 4-23: Testing andMeasurement Techniques - Test Methods for Protective Devices forHEMP and Other Radiated Disturbances
IEC 61000-4-24:2015 - Electromagnetic compatibility (EMC) – Part4-24: Testing and measurement techniques – Test methods forprotective devices for HEMP conducted disturbance
IEC 61000-4-25:2012 -Electromagnetic compatibility (EMC) Part 4-25: Testing andmeasurement techniques – HEMP immunity test methods for equipmentand systems
IEC 61000-4-27:2009 - Electromagnetic compatibility (EMC) – Part4-27: Testing and measurement techniques – Unbalance, immunity testfor equipment with input current not exceeding 16 A per phase
IEC 61000-4-28:2009 - Electromagnetic compatibility (EMC) – Part4-28: Testing and measurement techniques – Variation of powerfrequency, immunity test for equipment with input current notexceeding 16 A per phase
IEC 61000-4-29:2000 - Electromagnetic Compatibility (EMC) - Part4-29: Testing and Measurement Techniques - Voltage Dips, ShortInterruptions and Voltage Variations on d.c. Input Power PortImmunity Tests
IEC 61000-4-30:2015 - Electromagnetic compatibility (EMC) - Part4-30: Testing and measurement techniques - Power qualitymeasurement methods
IEC 61000-4-31:2016 -Electromagnetic compatibility (EMC) – Part 4-31: Testing andmeasurement techniques – AC mains ports broadband conducteddisturbance immunity test
IEC 61000-4-33:2005 -Electromagnetic compatibility (EMC) Part 4-33: Testing andmeasurement techniques Measurement methods for high-power transientparameters
IEC 61000-4-34:2009 - Electromagnetic compatibility (EMC) – Part4-34: Testing and measurement techniques – Voltage dips, shortinterruptions and voltage variations immunity tests for equipmentwith mains current more than 16 A per phase
IEC 61000-4-36:2014 -Electromagnetic compatibility (EMC) – Part 4-36: Testing andmeasurement techniques – IEMI immunity test methods for equipmentand systems
IEC 61000-4-37:2016 -Electromagnetic compatibility (EMC) – Part 4-37: Testing andmeasurement techniques – Calibration and verification protocol forharmonic emission compliance test systems
IEC 61000-4-38:2015 -Electromagnetic compatibility (EMC) – Part 4-38: Testing andmeasurement techniques – Test, verification and calibrationprotocol for voltage fluctuation and flicker compliance testsystems
IEC 61000-4-39:2017 -Electromagnetic compatibility (EMC) – Part 4-39: Testing andmeasurement techniques – Radiated fields in close proximity –Immunity test