| ASTM E162-2009 Standard Test Method for Surface Flammability of MaterialsUsing a Radiant Heat Energy Source 柔性塑料表面可燃性测试 | |
| TestClause | Requirement |
| Conditioning | Predry specimens for 24 h at140°F (60°C) and then condition to equilibrium (constant weight) atan ambient temperature of 73 ± 5°F (23 ± 3°C) and arelative humidity of 50 ± 5 %. |
| SampleRequired: | |
| 8 pieces, 6’"(152mm) wide by18”(457mm) long by maximum 1” (25.4mm) thickness，8 片152mm×457mm×实际厚度（一般不大于25.4mm）。 | |
| Note: 1）试样数量Zui少需要4组，由于标准要求Zui少要4组有效的试验结果，为了安全起见，提供8组。 2）Materials intended to beapplied to a substrate shall be tested on thatsubstrate.对于在实际应用中有确定的应用基材,测试中应该应用到这种指定的基材上。 3）Flexible materials shallbe cut to 10 by 22-in. (255 by 560-mm)，对于软质材料，提供尺寸为255 by560-mm。 4）对于其他特殊情况，单独咨询 | |
| Turnaround time: normal (9 working days) | |
SampleReport 报告样本：
Sample forreference 参考图片: