| Reading Glasses(老花鏡) FOREU | |
| Ophthalmic optics — Specifications forready-to-wear spectacles (BS EN 14139) | |
| Clause | TestRequirement |
| 4.2 | General requirements |
| -Lens shall fulfil the general requirements of EN ISO14889 | |
| -Frame shall fulfil the requirements of EN ISO 12870 (not includingclause 4.2.1 General physiological compatibility) | |
| -Glazing of spectacles lenses meet lens retention test per EN ISO12870 | |
| - Thespectacle lenses shall be securely held in position so thatmovement or rotation in the frame cannot occur under any conditionof intended use. | |
| 4.3 | Optical power range |
| (Shall have equal nominal spherical powerwithin range from +1.00 to +3.50 Dioptres) | |
| 4.4 | Optical power tolerances |
| (Tolerances to be applied to the valuesdeclared by the manufacturer shall comply with EN ISO8980-1) | |
| 4.5 | Reference points and prismatic powertolerances |
| 4.5.1 | Design reference points |
| 4.5.2 | Prismatic power tolerances |
| 5 | Marking |
| Indications on packaging andwarnings | |
| Sample Required: 8 Pairs (Assembled Product) -Not include Nickel Release (EN ISO 12870) | |
| Turnaround Time: 13-15 working days (Regularservice) | |
| Remarks: | |
| 1. Designed reference points shall be providedby manufacturer. (Default to box center if no information isprovided. | |
| 2. *Same lens/ frame - Same materials AND Samesize AND Same color. | |
| 3. This standard covers those reading glasseswith Nominal spherical power within the range from +1.00 to +3.50dioptres. | |
| 4. CE mark (at least 5 mm in height ) isrequired under 93/42/EEC Medical Device Directive. | |
Sample for reference参考图片:
Sample for reference参考图片: