供应Eastar™ PCTG 美国伊士曼 5011无定形 文具 玩具 体育用品
Eastar™5011
Copolyester
Eastman Chemical Company
产品说明:
Eastar™ Copolyester 5011 is a glycol modified polyethyleneterephthalate(PET). The modification is made by adding a secondglycol, cyclohexanedimethanol (CHDM) during the polymerizationstages. The second glycol is added in the proper proportion toproduce an amorphous polymer.
This product has been GREENGUARD INDOOR AIR CERTIFIED®.
The GREENGUARD INDOOR AIR CERTIFIED® Mark is a registeredcertification mark used under license through the GREENGUARDEnvironmental Institute (GEI). GEI is an industry-independent,non-profit organization that oversees the GREENGUARD CertificationProgram. The GREENGUARD Certification Program is an industryindependent, third-party testing program for low-emitting productsand materials for indoor environments. For more information aboutGEI and to obtain printable certificates for Eastman™ Copolyesters,visit www.greenguard.org. Choose Eastman Chemical Company under theManufacturer category and click search to display a list of ourproducts.
物性信息:
基本信息 | |
---|---|
黄卡编号 |
|
特性 |
|
用途 |
|
形式 |
|
物理性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
比重 | 1.28 | g/cm³ | ASTM D792 |
收缩率 - 流动 | ASTM D955 | ||
1.60 mm | 0.50 | % | ASTM D955 |
3.20 mm | 0.20 | % | ASTM D955 |
吸水率 (23°C, 24 hr) | 0.13 | % | ASTM D570 |
硬度 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
洛氏硬度 (R 级, 23°C) | 106 | ASTM D785 |
机械性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
抗张强度 (断裂, 23°C) | 25.0 | MPa | ASTM D638 |
伸长率 (断裂, 23°C) | 30 | % | ASTM D638 |
弯曲模量 (23°C) | 2200 | MPa | ASTM D790 |
弯曲强度 (23°C) | 75.0 | MPa | ASTM D790 |
冲击性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
悬壁梁缺口冲击强度 | ASTM D256 | ||
-40°C | 28 | J/m | ASTM D256 |
23°C | 69 | J/m | ASTM D256 |
无缺口悬臂梁冲击 | ASTM D4218 | ||
-40°C | 2600 | J/m | ASTM D4218 |
23°C | 无断裂 | ASTM D4218 |
热性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
载荷下热变形温度 | ASTM D648 | ||
0.45 MPa,未退火 | 67.0 | °C | ASTM D648 |
1.8 MPa,未退火 | 62.0 | °C | ASTM D648 |
光学性能 | 额定值 | 单位制 | 测试方法 |
---|---|---|---|
透射率 (总计) | 90.0 | % | ASTM D1003 |
雾度 | 0.30 | % | ASTM D1003 |
注射 | 额定值 | 单位制 | |
---|---|---|---|
干燥温度 | 71.0 | °C | |
干燥时间 | 4.0 到 6.0 | hr | |
加工(熔体)温度 | 249 到 271 | °C | |
模具温度 | 16.0 到 38.0 | °C |
供应Eastar™ PCTG 美国伊士曼 5011无定形 文具 玩具 体育用品
供应Eastar™ PCTG 美国伊士曼 5011无定形 文具 玩具 体育用品