Test item 测试名称:UV老化 Norm 标准:1.快速紫外老化QUVWeathering常规条件ASTM G154Cycle 1(非金属材料)无喷淋条件ASTM D4329 CycleA(塑料)ASTM D4587Cycle4(涂料)AATCC
186 Option 1(纺织品)ISO 4892-3方法ACycle1(塑料)非常规条件ASTM G154-06Cycle2~6,8(非金属材料)无喷淋条件ASTMD4329CycleB,C(塑料)ASTM D4587 Cycle 1~3(涂料)ASTM
D5208(塑料)ASTM D3424 Method 7(印刷品)AATCC 186 Option 3(纺织品)ISO4892-3(塑料)SAE J2020(汽车外饰件)EN ISO 11507 Method A(涂料)BS 2782Part5(塑料)GB/T 16422.3(塑料)
非常规条件ASTM G154-06 Cycle7(非金属材料)带喷淋条件ISO11507(涂料和清漆)2.氙灯老化Xenon-ArcWeathering常规条件ISO 4892-2Cycle 1、2(塑料)ISO 11341Cycle A(涂料和清
漆) GB/T 16422.2(塑料)GB/T 1865 CycleA(涂料和清漆)非常规条件ASTM G155 cycle1~11(非金属材料)ASTM D2565cycle 1(塑料,室外)ASTM D4459(塑料,室内)ASTM D6695cycle 1~5
(涂料) ASTM D3424 Method3,4(印刷品)ASTM D4355(土工布)ISO11341 cycleB,C,D(涂料)UL 1581Section 1200(塑料)AATCC 169 Option 1(纺织品)常规条件SAEJ1885(汽车内饰
件)SAEJ2412(汽车内饰件)SAE J1960(汽车外饰件)SAE J2527(汽车外饰件)常规条件PV13038460Z-SEA-0000TSM 5514GTSM 0501GSES N32923.碳弧灯老化Carbon-ArcWeathering碳弧灯老化
ASTMG152ae1,Cycle1,2,6(非金属材料)开放型(Sunshine)碳弧灯，只能做光照或光照加喷淋的条件ASTMD822(涂料)ASTM D3361(无滤镜，涂料)ASTM D1499(塑料)JIS D0205(汽车零件)4.臭
氧老化Ozone Aging常规条件ASTM D1149(橡胶)臭氧浓度:50pphm
温度:40℃
ASTMD1171(橡胶)ISO 10960(橡胶和塑料软管，动态)ISO 7326(橡胶和
塑料软管，静态)GB/T7762(橡胶，静态)GB/T13642(橡胶，动态)ISO1431-1(橡胶，静态)DIN53509-1(橡胶，静态)非常规条件ASTMD1149(橡胶)臭氧浓度:0-
500pphm
温度:30-70℃
ASTMD1171(橡胶) ISO10960(橡胶和塑料软管，动态)ISO7326(橡胶和塑料软管，静态)GB/T7762(橡胶，静态)GB/T 13642
(橡胶，动态)ISO1431-1(橡胶，静态)DIN53509-1(橡胶，静态)5.耐温湿老化Temperature andHumidityTest高温测试
High Temperature TestASTM D573(橡胶)温度范围:常温
- 250℃ASTM D865(橡胶)ISO188(橡胶)DIN 53508(橡胶)GB/T 3512(橡胶)ASTMD3045(塑料)GB/T7141(塑料)GB/T1735(涂料)参考上述标准温度范围:250-300℃低温测试
Low
TemperatureTest客户提供温度范围:0--40℃客户提供温度范围:-40--70℃恒温恒湿测试ConstantTemperature andHumidity TestASTM D2126(塑料)温度范围:40-
90℃
湿度范围:25-98%RH
低湿度条件(25%RH)在高温条件下(60℃以上)才能达到ASTM D3459(木器涂料)GB/T1740(涂料)ISO4611(塑料)GB/T 12000
(塑料)GB/T 15905(硫化橡胶)温湿循环测试Temperature and HumidityCyclicTest客户提供方法温度范围:-40-150℃
湿度范围:25-98%RH
温度变化速率:1-3℃/min水雾测试
Water SprayASTM D1735(涂料)相对湿度测试
****
Humidity Resistance TestASTM D2247(涂料)6.盐雾测
试Salt SprayTest盐雾试验Nneutral Salt Spray(NSS)ASTMB117ISO 9227ISO4611(塑料)ISO 7253(涂料)BS3900-F12(涂料)BS7479IEC60068-2-11GB/T10125(涂料)GB 2423.17DIN
50021Picture forReference参考图片:Sample Report报告样本:
