C62400铝青铜棒
C62400 Details &Applications:
C62400 Aluminum Bronze
CuAl11Fe3 – UNS.C62400 Aluminum BronzeAlloys, which recommended for medium-duty applications involvingwear and fatigue, especially where high ductility is required forcold working, C62300 and C62400 aluminum bronze applicationsinclude valve and pump components for industrial process streams,as well as for marine equipment, high strength fasteners and poleline hardware.
Typical Application for C62400 Aluminum BronzeAlloys
Fasteners: Nuts
Industrial: Support Bushings, Valve Balls,Welding Wire, Wear Plates, Tie Rods, Gears, Cams, Drift Pins,Hydraulic Bushings, Bushings
Available Sizes:
Custom Diameter & Sizes, Random Mill lengths
Available Products (forms):
Round bars, Flat bars, Square bars, Rectangular bars, Hexagonbars
Custom shapes are available upon request.
ChemicalComposition:
Al: 10.00-11.50%
Fe: 2.00-4.50%
Mn: 0.30% Max.
Si: 0.25% Max.
Sn: 0.20% Max.
Cu: Balance
Note: Copper plus additions equal 99.50%minimum.
Typical PhysicalProperties:
Specific Gravity: 7.45 g/cm3
Coefficient of Thermal Expansion per °C: 16.20 x 10-6(20-300°C)
Electrical Conductivity (% IACS): 12 % @ 68 F
Thermal Conductivity: 34.0 Btu · ft/(hr · ft2·oF)at 68F
Modulus of Elasticity in tension: 17000 ksi
Note:
1). the units are based upon US Customary.
2). the typical physical properties apply to age hardenedproducts.
InternationalSpecification:
Rods/Bars: UNS.C62400, CDA624, ASTM B150
European Standards: CuAl11Fe3, DIN.2.0936,CA106