Mobil ATF Type F
Mobil Type F ATF
Type F Automatic Transmission Fluid
Product Description
Mobil Type F ATF is an automatic transmission fluid whichis made from high quality base oils with viscosity index improvers,antioxidants, anti-wear agents, defoamants and special additives toprovide the controlled frictional characteristics of a Type F fluidin automatic transmission applications.
Applications
The frictional characteristics of an automatic transmissionfluid are an important factor in the design and operation of thetransmission. All Ford transmissions built prior to 1977, andcertain models that continued in use during 1977-1980, weredesigned for a high-friction fluid that allowed the shiftingclutches to lock up or engage quickly. Ford specificationESW-M2C33-F covers this type of product, which is commonly referredto as "Type F" fluid.
These vehicles are identified as:
All 1976 and earlier Ford, Lincoln, and Mercury models of cars,vans, and light trucks;
All 1977-1980 models having either ESW-M2C33-F or no number atall stamped on the transmission dipstick
Mobil Type F ATF is recommended by ExxonMobil for use inapplications requiring Type F fluid as follows:
Automatic transmissions in certain older Toyota, Mazda, Volvo,and other imported vehicles that require an ESW-M2C33-F fluid. Inaddition, this type of ATF is specified for some Ford powersteering systems.
For the makeup and refill in power steering systems of thefollowing Ford vehicles:
1980 and older Lincoln, Continental, and Mark;
1978 and older models of all other Ford cars, vans, and lighttrucksFor anti-wear requirements of Sperry Vickers industrialhydraulic systems where low wear in the ASTM D 2882 vane pump testis the principal criterion.
Mobil Type F ATF is not recommended for automatic transmissionsin Ford, General Motors, Chrysler, American Motors, or any othercars requiring a Dexron-II, Dexron-IIE, Dexron-III orMercon-approved fluid, or for those Ford products requiring an M2C138CJ (Type CJ) fluid or an M2C 166H (Type H) fluid.
Typical Properties
Mobil Type F ATF | |
Viscosity | |
cSt @ 40ºC | 36.0 |
cSt @ 100ºC | 7.2 |
cP @ -18ºC (0ºF) | 1,600 |
cP @ -40ºC (-40ºF) | 45,000 |
Viscosity Index, ASTM D 2270 | 150 |
Pour Point, ºC, ASTM D 97 | -40ºC (-40ºF) |
Flash Point, ºC, ASTM D 92 | 160 (320) |
Gravity, API | 31.4 |
Color | Red |