高光泽ABS台湾奇美PA-757GJ08黑色,音响外壳,电视框用
高光泽ABS,ABS PA-757GJ08,PA-757GJ08台湾奇美
General Purpose ABS, POLYLAC® PA-757G J08(Black)
Processing Conditions
A Pre-drying 80 ~ 85 °C x 3 ~ 4 hrs
depending on a) Humidity
b) Ratio of reground resin
c) Storage conditions
B. Barrel Setting Profile
MAX(°C) 230 230 220
MIN(°C) 190 190 180
C. Mold Temperature 80 ~ 120 °C
depending on a) Thickness
b) Dimension
c) Gate and runner system
D Injection Pressure 50~60 %
Holding Pressure 40~50 %
Back Pressure 5~10 kg/cm 2
NOTE :
1. Keep the resin from dust and contamination during handling andproduction.
2. Do not retain the hot melt at the barrel for a long time betweeninjection cycles.
3. Temperature setting of manifold system should not exceed 250°Cto avoid melt from