2016/9/9 UL Certification
http://i/ul/cert.aspx?ULID=533910 1/1
i
Component - Plastics [guide info] E248280
LG Chem (Guangzhou) Engineering Plastics Co Ltd
1 YECHENG 1ST RD, EAST SEC OF ECONOMIC & TECH DEV DIST,GUANGZHOU GUANGDONG 510760 CN
LUPOL GP-3(l)2
Polypropylene (PP), mineral reinforced, "Lupol", furnished aspellets
Min Thk Flame RTI RTI RTI
Color (mm) Class HWI HAI Elec Imp Str
ALL 1.5 HB - - 65 65 65
Comparative Tracking Index (CTI): - Inclined Plane Tracking(IPT): -
Dielectric Strength (kV/mm): -
Volume Resistivity (10 x ohm-cm): -
High-Voltage Arc Tracking Rate (HVTR): -
High Volt, Low Current Arc Resis
(D495):
-
Dimensional Stability (%): -
(l) - Denotes mineral filler content 11-39 percent incl.
ANSI/UL 94 small-scale test data does not pertain to buildingmaterials, furnishings and related contents. ANSI/UL 94
small-scale test data is intended solely for determining theflammability of plastic materials used in the components
and parts of end-product devices and appliances, where theacceptability of the combination is determined by UL.
Report Date: 2004-07-21
Last Revised: 2006-03-08
© 2016 UL LLC
IEC and ISO Test Methods
Test Name Test Method Units Thk (mm) Value
Flammability IEC 60695-11-10 Class (color) 1.5 HB75 (ALL)
Glow-Wire Flammability (GWFI) IEC 60695-2-12 C - -
Glow-Wire Ignition (GWIT) IEC 60695-2-13 C - -
IEC Comparative Tracking Index IEC 60112 Volts (Max) - -
IEC Ball Pressure IEC 60695-10-2 C - -
ISO Heat Deflection (1.80 MPa) ISO 75-2 C - -
ISO Tensile Strength ISO 527-2 MPa - -
ISO Flexural Strength ISO 178 MPa - -
ISO Tensile Impact ISO 8256
kJ/m 2
- -
ISO Izod Impact ISO 180
ISO Charpy Impact ISO 179-2
