环氧树脂胶带3M Super 20 胶带

uper 10Electrical Tape

Super 20 ElectricalTape

Flame-retardant epoxy film with thermosetting, rubber resinpressure-sensitive adhesive

3M? Super 10 Electrical Tape offers flexibility and conformabilityfor easy handling and application. It meets the rigidflame-retardancy requirements of the Component Test Program of UL510. In application, the tape maintains good electrical propertiesafter elongation. 3M Super 10 also maintains good mechanical andelectrical properties as tested for UL recognition at 155°C.

The tape is suggested for use in wrapping relays, coils,transformers, bobbin-wound subfractional horsepower shaded-polemotors and stick-wound coils. It can also be used for holding infractional horsepower motors, arbor-wound coils and wireharnesses.

To achieve maximum solvent resistance and holding performance,thermoset the tape at one of the following cycles:

UL File Number E17385, Guide OANZ2. Underwriters Laboratories (UL)recognized products have been evaluated for use as components ofend-product equipment that is listed or classified by UL.

To achieve Underwriters Laboratories recognition, componentconstruction must meet UL specifications and conditions ofacceptability for proper and safe use of the component orproduct.

1 hour@ 150°C

2 hours @ 135°C

3 hours @120°C

任意宽度均可裁切,金额不足￥1000需增加5mm上机修边损耗。

现货3msuper10电气绝缘胶胶带 
颜色：米白色
规格：393MM*55M
基材：环氧薄膜
胶系：橡胶
厚度：0.14（mm）
耐温：130（℃）
耐压：7500（V）
适用温度：130（℃）
特性：3m10#单面胶带属于环氧薄膜胶带抗焊接，抗刺穿，质薄，绝缘强度高，从形性好，UL认可，耐温程度达150摄氏度及阻燃，适用于线圈封包，固定，捆扎，緾合，外层及线间绝缘。
适用范围：高温用到喷墨

变压器专用绝缘胶带

耐温155C，F级环氧树脂胶带

Super 10 Electrical Tape

Flame-retardant epoxy film with thermosetting, rubber resinpressure-sensitive adhesive

3M? Super 10 Electrical Tape offers flexibility and conformabilityfor easy handling and application. It meets the rigidflame-retardancy requirements of the Component Test Program of UL510. In application, the tape maintains good electrical propertiesafter elongation. 3M Super 10 also maintains good mechanical andelectrical properties as tested for UL recognition at 155°C.

The tape is suggested for use in wrapping relays, coils,transformers, bobbin-wound subfractional horsepower shaded-polemotors and stick-wound coils. It can also be used for holding infractional horsepower motors, arbor-wound coils and wireharnesses.

To achieve maximum solvent resistance and holding performance,thermoset the tape at one of the following cycles:

UL File Number E17385, Guide OANZ2. Underwriters Laboratories (UL)recognized products have been evaluated for use as components ofend-product equipment that is listed or classified by UL.

To achieve Underwriters Laboratories recognition, componentconstruction must meet UL specifications and conditions ofacceptability for proper and safe use of the component orproduct.

1 hour@ 150°C

2 hours @ 135°C

3 hours @120°C