TRANS-TEK传感器330全系列型号:0330-0000,0331-0000,0332-0000,0333-0000,0334-0000,0335-0000,0336-0000,0337-0000
Series 3303/8 Inch AC Gaging LVDTs
The Series 330 3/8″ AC Gaging LVDTs provide precise lineardisplacement sensing in a compact, spring loaded package. Advancedcoil winding techniques are employed to minimize package length andoptimize overall performance. Spring forces have been carefullyselected to insure the proper balance of mechanical fre and tip force. Available in strokes ranging from ± 0.005″to ± 1.0″, these sensors are ideally suited to material thicknessmeasurements, single or multi-point surface profiling, creeptesting, or any other application re the use of a small, springloaded LVDT. These transducers are also an excellent replacementfor a standard dial indicator.
KEY FEATURES
Ranges from ±0.005” to ±1.0”
Self-Lubricating Bearing
Non-linearity ≤ 0.20%
20 MicroInch Repeatability
SPECIFICATIONS - ELECTRICAL (Reference frequency 7.0 KHz)
MODELUNITS0330-00000331-00000332-00000333-00000334-00000335-00000336-00000337-0000LINEARRANGE±Inches±(mm)0.005
(0.13)0.01
(0.26)0.025
(0.64)0.05
(1.27)0.1
(2.54)0.25
(6.35)0.5
(12.7)1.0
(25.4)NON LINEARITY
< ±0.25% Max.< ±0.20% Max.OVERTRAVEL
OUTPUT MONOTONIC OVER ENTIRE MECHANICAL TRAVELTEMPERATURE RANGE-4°Fto +176°F (-20°C to +80°C) (OPERATING) -65 °F to+176°F (-54°C to +80°C) (STORAGE)TEMP. COEFFICIENTSZERO: <±0.001% Linear Range/°F SENSITIVITY: <±0.01% /°FSENSITIVITYV/in./V ±10%44444210.5PHASEANGLE°55555000INPUT IMPEDANCEOhms260255250245480320300355INPUTRESISTANCEOhms DC3636363660223040OUTPUT RESISTANCEOhmsDC5205210170185NULL VOLTAGE% V Ex.Max.0.20.250.30.40.8111MAXIMUM EXCITATION15 VRMS
SPECIFICATIONS - MECHANICAL
MODELUNITS0330-00000331-00000332-00000333-00000334-00000335-00000336-00000337-0000TOTALLENGTH AInches (mm)2.45 (62.2)2.45 (62.2)2.45 (62.2)2.45 (62.2)2.93(74.4)5.35 (136)6.86 (174)10.45 (265)SHAFT EXTENSION BInches(mm)0.65 (16.5)0.65 (16.5)0.65 (16.5)0.65 (16.5)0.83 (21.1)1.22(30.9)1.69 (42.9)2.60 (66.0)NULL POSITION CInches (mm)0.1 (2.54)0.1(2.54)0.1 (2.54)0.1 (2.54)0.15 (3.81)0.35 (8.89)0.57 (14.5)1.15(29.2)SPRING FORCE @ NULLLbs.0.730.730.730.731.070.740.570.70FREQ.RESPONSEHz250866DIMENSIONAL DRAWING
SCHEMATIC
ACCESSORIES
PART NUMBERDESCRIPTIONA002-0041Adapter for alternate contact tips:5-60 Thread to 4-48 UNF-2B ThreadG000-0000Contact Tip, AGD#7G000-0008Contact Tip, .30″ Spherical O.D.; 5-60 Internal Threads.(Included with transducer)DC-DC OPERATION WITH OPTIONAL OSCILLATOR/DEMODULATOR
To facilitate prototyping, or in instances where the preferenceis a DC in – DC out system, any of the standard or High TemperatureSeries 330 can be used in conjunction with the Model 1000- 0014Oscillator/Demodulator. Designed to work together, the DC systemgives the same level of performance as provided by the AC LVDTalone. The high level DC output voltage can be directly interfacedwith analog circuits as well as data ac cards, PLCs, or A/Dconverters. Provisions for customizing the Model 1000-0014 toprovide zero offsets and nonstandard gains allow a simple and costeffective method of tailoring a system to meet individual customerre
SYSTEM SPECIFICATIONS (Combined Performance of LVDT and1000-0014)
MODELUNITS0330-00000331-00000332-00000333-00000334-00000335-00000336-00000337-0000SIGNALOUTPUT±VDC0.20.41.02.04.05.05.05.0OUTPUT CURRENT±3 mA without distortionOUTPUTRIPPLEVRMS0.0040.0080.020.030.030.030.030.03POWER INPUT
±14.5 to ±28 VDC @ ±100 mA Max., Input polarityprotectedTEMPERATURE RANGE1000-0014+32 °F to +158°F (0°C to +70°C )(Operating) -65 °F to +257°F (-54 °C to +125°C )(Storage)TEMP. COEFFICIENTS1000-0014Zero < ±0.00035 VDC/°F Sensitivity < ±0.02%/°F
