深圳smd零件计数器中英双语标准点料机

The firstchapter product introduction

全自动SMD零件计数器，两种型号：普通零件计数器和测漏型零件计数器。

Completelyautomatic SMD components counter, two kind of models: Ordinarycomponents counter and leak hunting components counter.

一、产品原理  Productprinciple

1、普通零件计数器：采用光电传感原理，利用零件载带引导孔与零件的对应关系，通过专用处理芯片及大规模集成电路处理，实现零误差，测定SMD零件计数量，可实现方便快捷的计数，是SMT物料管理的高效辅助设备。

Ordinarycomponents counter: Uses the electro-optical sensing principle,carries using the components leads the pilot hole and thecomponents corresponding relationships, through the special-purposeprocessing chip and large scale integrated circuit processing,realizes the zero error, the accurate determination SMD componentscounting quantity, may realize the convenience quick counting, isthe SMT material management highly effective supportingfacility.

   2、测漏型零件计数器：配备高速光纤，根据空料和实料光线强度对比原理，准确检知空料。人性化设计可切换检知空料停止两种状态，前者方便流水线作业质量管理，后者可实现仓库盘点零误差。

      Leakhunting components counter: Provides the high speed optical fiber,according to the spatial material and the solid materialcandle-power contrast principle, examines accurately knows thespatial material. The user-friendly design may cut examines knowsthe spatial material to stop two conditions, the former convenienceassembly line work quality control, the latter may realize thewarehouse inventorying zero error.
二、产品特色  Productcharacteristic

     全自动方式计算零件数量,方便点料,发料作业操作简单,独具匠心的防料带脱落设计将对料带的伤害减少至Zui小,正反向皆可计数,可预设数量,计算数量,零误差。可加装扫描枪及条码打印机，方便管理作业。

     Completelyautomatic way computation components quantity, facilitates amaterial, sends the material work simplicity of operator, has aspecial inventive mind against material belt will fall off thedesign to reduce to the material belt's injury to is smallest,forward and reverse all may count, but preinstall quantity, willcalculate quantity precisely, zero error. May install the scanninggun and the bar code printer, facilitates the managementwork.

三、 产品规格（标准型）Product specification

电源：AC220/110，50HZ，25W

Powersource: AC220/110,50HZ,25W

计数范围：-99999--99999PCS

Counting scope: -99999--99999PCS

外型尺寸：L470*W300*H180mm

Outlook size:L470*W300*H180mm

重量：10KG

Weight:10KG

产品规格（测漏型）Productspecification

四 、产品应用（标准型）Productapplication

   SMD料带式零件皆可适用

   TheSMD material belt type components are all suitable

   料带轮直径：任何尺寸皆可适用

   Expectsthe band pulley diameter: Any size is all suitable

   料带间隔（PITCH）：2，4，8，10，12，16，24，32，44，56mm

   Expectsthe belt gap (PITCH): 2,4,8,10,12,16,24,32,44,56mm

   料带宽度（WIDTH）：8，12，16，24，32，44，56mm

   Expectsthe belt width (WIDTH): 8,12,16,24,32,44,56mm

产品应用（测漏型） Productapplication