手电筒,手提灯上亚马逊要办理测试报告UL 783
These requirements cover battery-operated flashlights andlanterns for use in hazardous locations, Class I, Division 1 ,Groups A, B, C and D; Class I, Division 2, Groups A, B, C, and D;Class II, Division 1 , Groups F and G; and Class II, Division 2,Groups F and G as defined in the National Electrical Code, NFPA70.
These requirements apply to complete products withself-contained batteries, and include products consisting of abattery pack assembly and light assembly with interconnectingflexible cord.
These requirements do not cover flashlights and lanterns of theexplosion-proof type or other type of construction providingprotection against ignition of flammable gas- or vapor-airatmospheres. Flashlights and lanterns that are intrinsically safefor Class I, Division 1 are covered by the Standard forIntrinsically Safe Apparatus and Associated Apparatus for Use inClass I, II, and III, Division 1 , Hazardous (Classified)Locations, UL 91 3. Flashlights designed for Zones 0, 1 , and 2 arecovered by the Standards for Electrical Apparatus for Explosive GasAtmospheres, UL 60079 series.
These requirements cover equipment for use under the followingatmospheric conditions:
a) A minimum ambient temperature of minus 25°C (minus 13°F);
b) An oxygen concentration not greater than 21 percent byvolume; and
c) A nominal barometric pressure of one atmosphere.
UL783
这些要求包括在危险场所使用的电池操作手电筒和灯具,I类,1类,A、B、C和D组;I级,2类,A、B、C和D组;II级,1区,F组和G组;以及国家电气规范NFPA70中定义的II级2区F组和G组。
这些要求适用于配有独立电池的完整产品,包括由电池组组件和带有互连软线的灯组件组成的产品。
这些要求不包括防爆型或其他结构类型的手电筒和灯具,以防止易燃气体或蒸汽空气环境着火。I类1类本质安全的手电筒和灯具包含在UL913《I、II和III类1类危险(分类)场所用本质安全设备和相关设备标准》中。设计用于0、1和2区的手电灯包含在《爆炸性气体环境用电气设备标准》UL60079系列中。
这些要求包括在以下大气条件下使用的设备:
a) 低环境温度为-25°C(-13°F);
b) 氧气浓度不大于21%(按体积计);和
c) 一个大气压的标称气压。
测试报告申请流程