ZB25VQ128DSJG ZB25VQ128DSIG ZB25VQ128ASIG NOR FLASH 恒烁

The ZB25VQ128Dsupport the standard Serial Peripheral Interface (SPI), Dual/QuadI/O SPI as well  as 2-clocksinstruction cycle Quad Peripheral Interface (QPI) : Serial Clock,Chip Select, Serial  Data I/O0 (DI),I/O1 (DO), I/O2 (WP#), and I/O3 (HOLD# / RESET#). SPI clockfrequencies of up to 133MHz  are supportedallowing equivalent clock rates of 266MHz (133MHz x 2) for Dual I/Oand 532MHz (133MHz  x 4) for Quad I/Owhen using the Fast Read Dual/Quad I/O and QPI instructions. Thesetransfer rates  can outperformstandard Asynchronous 8 and 16-bit Parallel Flash memories. TheContinuous Read Mode  allows forefficient memory access with as few as 8-clocks ofinstruction-overhead to read a 24-bit  address, allowingtrue XIP (execute in place) operation. A Hold pin, WriteProtect pin and programmable write protection, with top or bottomarray control,  provide furthercontrol flexibility. Additionally, the device supports JEDECstandard manufacturer  and device ID andSFDP Register, a 128-bit Unique Serial Number and three 1024-ByteSecurity Registers. The ZB25VQ128Dprovides an ideal storage solution for systems with limited space,signal  connections, andpower. These memories' flexibility and performance is better thanordinary serial  flash devices.They are ideal for code shadowing to RAM, executing code directly(XIP), and storing  reprogrammabledata.

FEATURES 

PowerSupply Voltage  -Single 2.3V-3.6Vsupply 

128Mbit Serial Flash  -128M-bit/16M-Byte/65,536 pages -256Bytes per programmable page -Uniform 4K-ByteSectors, 32K/64K-Byte  Blocks

NewFamily of SPI Flash Memories  -Standard SPI:CLK, CS#, DI, DO, WP#,  HOLD#/RESET#-DualSPI: CLK, CS#, DI, DO, WP#,  HOLD#/RESET#-QuadSPI: CLK, CS#, IO0, IO1, IO2, IO3, RESET#-QPI:CLK, CS#, IO0, IO1, IO2, IO3,RESET# -Software &Hardware Reset -Auto-incrementRead capability 

TemperatureRanges  -Industrial (-40°Cto 105°C) 

Lowpower consumption  -1 μAtypical standby current, HFM =0 -10 μAtypical standby current, HFM =1 -1 μAtypical power down current 

Efficient“Continuous Read” and QPI Mode  -Continuous Readwith 8/16/32/64-Byte Wrap -Asfew as 8 clocks to address memory -QuadPeripheral Interface(QPI) reduces instructionoverhead 

FlexibleArchitecture with 4KB sectors  -Sector Erase(4K-Byte) -BlockErase (32K/64K-Byte) -PageProgram up to 256 Bytes -Morethan 100K erase/program cycles -Morethan 20-year data retention 

AdvancedSecurity Feature  -Software andHardware Write-Protect -PowerSupply Lock-Down and OTP protection -Top/Bottom,Complement array protection -IndividualBlock/Sector array protection -128-Bit Unique IDfor each device -Serial FlashDiscoverable Parameters  (SFDP)Register -3X1024-ByteSecurity Registers with OTP  locks-Volatile &Non-volatile Status Register  Bits

Highperformance program/erase speed  -Pageprogram time: 250us typical -Sector erasetime: 45ms typical -Blockerase time: 250ms typical -Chiperase time: 50s typical 

PackageOptions  -SOP8- 208mil -VSOP8- 208mil -SOP16- 300mil -DFN8(5*6*0.75mm)/(6*8*0.75mm) -TFBGA24-AllPb-free packages are RoHS compliant